Labsurface
LABFAST PRODUCTS
LABFENDER™
The LABFENDER™ (NEW) is a two or three-component, high solids, aliphatic polyurethane floor coating product which has low-VOC. It is designed to be applied as a protective layer over Labsurface’s LABPOX® epoxies, LABFAST® and LABSHIELD® ECO polyaspartic coatings. LABFENDER™ (NEW) boasts exceptional abrasion resistance, making it less likely for traffic patterns to appear over time even if exposed to heavy or repeated use caused by equipment, forklifts, presence of high foot traffic. The LABFENDER™ (NEW) has a superior chemical resistance which offers unparalleled protection against transfer of plasticizers with up to 60 times more resistance1, making it an ideal candidate to protect floors from staining prematurely. It also offers an additional UV protection that will significantly delay the yellowing of the epoxies it is applied on. LABFENDER™ (NEW) long working time allows to achieve maximum floor surface installations with minimal crew. The LABFENDER™ (NEW) formulation is based on advanced aliphatic urethane technology displaying superior chemical resistance.
LABFAST® LO 85
LABFAST® LO 85 provide optimal work time/cure time ratio. The short curing time, with a tack free in as low as 45 minutes*, allows the installation of a full floor system in one single day, with rapid return to service. The product displays excellent curing capability even at very low temperature levels. This product offers superior mechanical and chemical properties and is low maintenance. It also displays a superior aesthetic finish and excellent UV stability which makes it ideal for interior and exterior applications. We recommend the utilization of the LABTEC Vinyl Chips in combination with LABFAST®/LABSHIELD® ECO products. Two or three-coat systems can be considered.
LABPOX® LV 3D UV™
The LABPOX® LV 3D UV is a 100% solids, two-component (2A:1B), low-VOC, and ultra-low viscosity specialty epoxy designed for concrete floor coating, specifically engineered to provide optimal flow with 3D effects. This product possesses mechanical properties best suited for achieving 3D effects in metallic residential and commercial applications. It offers one of the longest pot life and working times in the industry. The LABPOX® LV 3D UV has been designed as a topcoat/body coat for 3D effects metallic epoxy flooring systems. The LABPOX® LV 3D UV formulation is based on high-performance cycloaliphatic polyamine technology, displaying outstanding properties and delivering a superior aesthetic finish.
LABPOX® MVB FAST
The LABPOX® MVB FAST is a 100% solids, two-component (2A:1B), and VOC-free epoxy moisture vapor barrier for concrete floor coatings. The main property of the LABPOX® MVB FAST is its ability to initially adhere to damp slabs with up to 100% relative humidity. Additionally, the LABPOX® MVB FAST demonstrates a permeance rating of less than 0.1 perm @ 16 mils which can reduce moisture vapor emission rate from 25 lbs/1000sq.ft/24hrs to less than 3 lbs/1000 sq.ft/24hrs on concrete. This performance aligns with the highest standards in the industry. The LABPOX® MVB FAST is used as a primer before installing a complete epoxy or polyaspartic system. The product can receive a subsequent layer of coating in as little as 4 hours, enabling very rapid commissioning. The product has been formulated with state-of-the-art components and is one of the most efficient vapor barrier systems in the industry.
LABPOX® 40 UV
The LABPOX® 40 UV is a 100% solids, two-component (2A:1B), low-VOC, and self-priming specialty epoxy designed for concrete floor coatings with optimal UV resistance. Available in translucent and super-opaque white, the product exhibits superior resistance to UV irradiation (color retention over time), making it best suited for residential and commercial applications. It possesses superior mechanical properties as well as a long pot life and working time. Ideal for lighter colors and metallic systems. While the LABPOX® 40 UV is primarily designed as a topcoat epoxy, it can also be applied directly to concrete as it is self-priming. The Super Opaque White version can only be used as a primer/base coat or, if used as a topcoat, must be protected with an AQUALAB® PUR, LABFENDER™, LABFAST®, or LABSHIELD® ECO topcoat product. The LABPOX® 40 UV formulation is based on high-performance cycloaliphatic polyamine technology, displaying outstanding properties and delivering a superior aesthetic finish.
